ANALYSIS OF EXPERIMENTAL TEST RESULTS OF CURRENT AND NEW COMPOSITION COLONS

Аннотация

INTRODUCTION efficiency of the cotton ginning process are being Large-scale scientific research is being conducted developed, and attention is being paid to improving in the world aimed at improving the technology of product quality and reducing costs by accelerating pre-treatment of cotton, including the process of the wide introduction of scientific and modern separating cotton fiber from the seed, techniques techniques and technologies into production. and technology. In this direction, among other things, the scientific foundations of increasing the Increasing the production of finished products https://www.theamericanjournals.com/index.php/tajet 32 THE USA JOURNALS THE AMERICAN JOURNAL OF ENGINEERING AND TECHNOLOGY (ISSN – 2689-0984) VOLUME 06 ISSUE06 with high added value based on the deep prepared, experimental tests were conducted by processing of raw cotton in our republic, improving comparing it with the existing SCh 15-32 cast iron the structure of the country's cotton ginning columns. For the experiment, Namangan 34 industry, reducing the cost of cotton products on tezsion, III industrial grade was taken. Practical the basis of technical and technological research work was conducted in December. We restructuring, and ensuring its competitiveness by know that the experiment process depends on the improving quality indicators. attention is paid. In air temperature. Before starting the ginning the new development strategy of Uzbekistan for process, the moisture and dirtiness of the cotton 2022-2026, including "...rapid development of the was determined. The experimental research work national economy and ensuring high growth rates of active and content colosniks was carried out and and doubling the production volume of textile introduced at the "Chust Elite Seed Farm" LLC, industry products" tasks were defined.[1] which belongs to the "Namangan Seed Development Center" DM, regional administration. In performing these tasks, on the basis of The main purpose of introducing the new design is theoretical and practical analyzes of the process of to improve the efficiency of the DL-10 gin machine separating raw cotton fiber from the seed, of the society by filling it with new technologies. improving the working chamber of the fiber separator machine and increasing the efficiency of When the 10-saw fiber separating device prepared the ginning process due to it, including improving for the experiment is working, the cotton is placed the interaction between the seed and the working from above. Cotton falls into the working chamber surface of the colosnik, and increasing the 2, the raw material becomes clean, the process of productivity of the ginning process due to the cutting and ginning of cotton begins through the coordination of the speed of the raw material. and saw cylinder 3, the process is adjusted through the reducing energy consumption are important adjuster 4 for better ginning of the seed with fiber, issues. then the separated fiber-containing colosnik passes through the slits 6, and the separated seed