К содержанию
РецензированоEN2014

Improving the performance of silicon anode in lithium-ion batteries by Cu2O coating layer

Si Hieu Nguyen • Jong-Choo Lim • Joong-Kee Lee

Научные статьи · 2014

Аннотация

The influence of a 200 nm Cu2O coating layer on the electrochemical performance of an 800 nm Si thinfilm anode was investigated by cyclic oltammetry, electrochemical impedance spectroscopy, and galvanostatic charge/discharge measurements. The electrochemical performance of the Si thin-film anode was improved by the coating layer. The coated Si anode exhibited higher values of conductivity in comparison with the pristine Si anode.Scanning electron microscopy images of the anodes after cycling test showed that the coated Si anode after cycling test had less cracks than the pristine Si anode. The galvanostatic charge/discharge measurements reveal that the cyclability and rate capability of the coated Si thin-film anode were better than the pristine Si thin-film anode.

Доказательный фрагмент

«The influence of a 200 nm Cu2O coating layer on the electrochemical performance of an 800 nm Si thinfilm anode was investigated by cyclic oltammetry, electrochemical impedance spectroscopy, and galvanostatic charge/d…»

Образец извлечения

Демо-превью

The influence of a 200 nm Cu2O coating layer on the electrochemical performance of an 800 nm Si thinfilm anode was investigated by cyclic oltammetry, electrochemical impedance spectroscopy, and galvanostatic charge/d… Полный текст публикации CiteX не хранит — доступ к первоисточнику открывается по DOI согласно лицензии издателя и выбранному плану.

DOI не указан
Цитирований
0
Тип
Журнал
Страна
Узбекистан
Спросить CiteX об этой работе

Смежные источники