К содержанию
РецензированоEN2022

The effect of the amount of waste of yarn on the physical and mechanical indicators

Mukhtarov J. · Atanafasov M. · Valieva Z. · Djumaniyazov M. · Laysheva E.

Научные статьи · 2022

Аннотация

In this article, the production of garments from materials in the sewing enterprises ,knitted waste was reproduced and yarn is produced from them, and in the laboratory of the Department of "Spinning Technology" yarns were given up to 500 br / m. 4 different variants obtained for testing, 30% cotton fiber + 70% Cotton Waste, 45% cotton fiber + 55% cotton waste, 20% cotton fiber + 80% cotton waste and 50% cotton fiber + 50% sample of yarn was taken from cotton waste and its physical and mechanical properties were determined in the laboratory "Centex Uz " at the Tashkent Institute of Textile and Light Industry.

Доказательный фрагмент

«In this article, the production of garments from materials in the sewing enterprises ,knitted waste was reproduced and yarn is produced from them, and in the laboratory of the Department of "Spinning Technology" yarn…»

Образец извлечения

Демо-превью

In this article, the production of garments from materials in the sewing enterprises ,knitted waste was reproduced and yarn is produced from them, and in the laboratory of the Department of "Spinning Technology" yarn… Полный текст публикации CiteX не хранит — доступ к первоисточнику открывается по DOI согласно лицензии издателя и выбранному плану.

DOI не указан
Цитирований
0
Тип
Журнал
Страна
Узбекистан
Спросить CiteX об этой работе

Смежные источники