TEACHING FUTURE TECHNOLOGY EDUCATION TEACHERS THE SEQUENCE OF ACTIONS IN THE "VALENTINE" PROGRAM IN A DIGITAL LEARNING ENVIRONMENT Authors Ismailova Momogul Hamraboy kizi

Аннотация

This article states that when working in the "Valentina" program, each user can use any tools at their discretion when creating a pattern and may use various objects in different sequences depending ontheconstruction style. Keywords:Valentina program, pattern, pattern piece, control points/marks, formulas. Introduction. In the program variables between straight away dependency This is the case. drawings in creation of course in consideration to be taken need. In the program actions clear in sequence execution marked. Directly dependency this means that the next actions previous objects fornot visible. Some size to compose algorithms authors this on principle compliance doesn't do it, this and one how many from the drawing consists of sizes to create impossible to the point In this case, all calculations one in the drawing done your increase recommendation we do, in this separately drawings build forconditional basicpoints ourcreation need It will be. In theprogram thisfeature pictures usingseeing Let's go out. For example, one with stitches sleeve installable drawing built. Now the sleeve high in the part ( okat along ) freedom ( posadka )​ distribution this is necessary and in the drawing sleeve high point(point B2) harvest was freedom totheamount looking at to movemeans. http://www.internationaljournal.co.in/index.php/jasass 20 Volume15 Issue 08, August 2025 Impact factor: 2019: 4.679 2020: 5.015 2021: 5.436, 2022: 5.242, 2023: 6.995, 2024 7.75 In the drawing, point B2 final status one how many to the parameter, including the Pos_A52 section to thelength (in the drawing this points a13 additions with (shown) is related to point B2. location formulas using designation for the Posa13_A52a13 cross section we create, that is shown pointslinewith Weconnect. In thepicture thisdotted line​ with separated. point B2 location determination for the formula Let's define. Formulas edit to the window let's go : http://www.internationaljournal.co.in/index.php/jasass 21 Volume15 Issue 08, August 2025 Impact factor: 2019: 4.679 2020: 5.015 2021: 5.436, 2022: 5.242, 2023: 6.995, 2024 7.75 Formulas edit in the window necessary cut found It didn't happen. This is because is that the intersection of Posa13_A52a13 is point B2 since creation then drawn. That is, from point B2 before created all objects program sees and from them use possible. But from point B2 then in the drawing created everyone something programs this point of view from the point of view according to can't. Here it is on the ground variables between straight away dependency manifestation will be : Next all actions previous objects for The program are not visible. cut visionfor pointit B2 from creating before drawing need was. Such a situation doesn’t draw one part again not to build for “ History ” (History) from the tab use This is possible. label his/her own main from duty outside objects construction inthe process to manage, that is drawing construction sequence to change opportunity But " History "​ ( History ) from the feature only necessity when use recommendation is done, because in this variables between cyclical dependency to thesurface itcomes, thisprogram by"not supported." This action from doing before your file copy save it because unsuccessful attempt in the case of filebroken ofstaying prevent you willget. So," History " (History) section: History ” ( History At the bottom of the ) window, the last action performed by the program is written — Constructing the section Posa13_A52a13. The arrow to the left of this line points to http://www.internationaljournal.co.in/index.php/jasass 22 Volume15 Issue 08, August 2025 Impact factor: 2019: 4.679 2020: 5.015 2021: 5.436, 2022: 5.242, 2023: 6.995, 2024 7.75 thelast action performed bytheprogram. For us, this intersection mustbe constructed before point V2 iscreated. For this " History " in the windowV2build practice we findand arrow one tothe position upwewill move. And history ( History ) window without closing standing, this in the drawing necessary cut again wecreate (points dotted linewith let's combine): Created incision immediately " History " in the window appearance It was. Only now this action point V2 from creation before done is considered. So since, point V2 for the formula when http://www.internationaljournal.co.in/index.php/jasass 23 Volume15 Issue 08, August 2025 Impact factor: 2019: 4.679 2020: 5.015 2021: 5.436, 2022: 5.242, 2023: 6.995, 2024 7.75 entering, theprogram this cut sees. Then, " History " in the window arrow-shaped cursor again previous to the place – the mirror below, program by last done we will do it and this Click the [OK] button to close the window. pressing Weclose. Nowtheformulas edit tothewindow enterthe result check possible: New cut formulas edit in the window reflection Now it is necessary the formula create for use possible.