К содержанию
РецензированоEN2025

DETERMINING THE USEFUL SURFACE OF THE GRID USED IN THE CLEANING PROCESS AT COTTON GINNING ENTERPRISES

Salomova Mashhura Arabboy qizi · Yuldashev Khurshid Khazratkulovich (commons attributes PhD, Namangan State Technical University, Namangan, Uzbekistan) · Muradov Rustam Muradovich (PhD, Jizzakh Polytechnic Institute, Jizzakh, Uzbekistan)

Международный журнал передовых научных исследований · 05 · 647-649 · 2025

Аннотация

The article analyzes the mesh surface, which is one of the main working parts of the raw cotton cleaning process at cotton ginning plants. The types and sizes of mesh surfaces used in cotton ginning plants, as well as their useful surface area, were determined using the Solidworks program. The useful surface angle of the mesh surface relative to the center of the spiked drum was determined at various values. As a result, graphs of the change in the useful surface relative to the center of the spiked drum are presented.

Доказательный фрагмент

«The article analyzes the mesh surface, which is one of the main working parts of the raw cotton cleaning process at cotton ginning plants.»

Образец извлечения

Демо-превью

The article analyzes the mesh surface, which is one of the main working parts of the raw cotton cleaning process at cotton ginning plants. Полный текст публикации CiteX не хранит — доступ к первоисточнику открывается по DOI согласно лицензии издателя и выбранному плану.

Цитирований
0
Тип
Журнал
Страна
Узбекистан
Ключевые слова
Cotton, lint, fiber, seed
Открыть DOI
Спросить CiteX об этой работе

Смежные источники