К содержанию
РецензированоEN2015

Labview based simulation and animation for the vibraton control of active mass damper

Abhishek D. D.

Диссертации и авторефераты · 2015

Аннотация

The goal of this project is to use the LabVIEW computational environment to develop, simulate and evaluate the system model and controller design for the vibration control of an Active Mass Damper (AMD) experimental setup. The AMD system consists of a one-story building model, with a control mass on the roof. Output measurements consist of mass position and roof acceleration. A state space model of the AMD system was developed previously, and has been used for the current work. The report provides (a) Review of system modeling, and a LabVIEW-based system model; (b) Development and LabVIEW-based simulation of a full order observer, in the absence of complete state information; (c) LabVIEW based animation of the system response.

Доказательный фрагмент

«The goal of this project is to use the LabVIEW computational environment to develop, simulate and evaluate the system model and controller design for the vibration control of an Active Mass Damper (AMD) experimental s…»

Образец извлечения

Демо-превью

The goal of this project is to use the LabVIEW computational environment to develop, simulate and evaluate the system model and controller design for the vibration control of an Active Mass Damper (AMD) experimental s… Полный текст публикации CiteX не хранит — доступ к первоисточнику открывается по DOI согласно лицензии издателя и выбранному плану.

DOI не указан
Цитирований
0
Тип
Журнал
Страна
Узбекистан
Спросить CiteX об этой работе

Смежные источники