К содержанию
РецензированоEN2011

Springer Handbook of Metrology and Testing

Czichos Saito Smith

Учебная литература · 2011

Аннотация

The ability to measure and to compare measurements between laboratories is one of the cornerstones of the scientific method. Globalization of research, development and manufacture has produced greatly increased attention to international standards of measurement. It is no longer sufficient to achieve internal consistency in measurements within a local laboratory or manufacturing facility; measurements must now be able to be reproduced accurately anywhere in the world. These demands are especially intense in materials science and technology, where many characterization methods are needed during the various stages of materials and product cycles. In order for new materials to be used and incorporated into practical technology, their most important characteristics must be known well enough to justify large research and development costs. The useful properties of materials are generally responses to external fields or loads under specific conditions. The stimulus field and environmental conditions must be completely specified in order to develop a reproducible response, and to obtain reliable characteristics and data. Standard test and calibration methods describe these conditions and the Springer Handbook of Materials Measurement Methods was developed to assist scientists and engineers in both industry and academe in this task.

Доказательный фрагмент

«The ability to measure and to compare measurements between laboratories is one of the cornerstones of the scientific method.»

Образец извлечения

Демо-превью

The ability to measure and to compare measurements between laboratories is one of the cornerstones of the scientific method. Полный текст публикации CiteX не хранит — доступ к первоисточнику открывается по DOI согласно лицензии издателя и выбранному плану.

DOI не указан
Цитирований
0
Тип
Журнал
Страна
Узбекистан
Спросить CiteX об этой работе

Смежные источники