К содержанию
РецензированоEN2025

Analysis of the design of stone holders in cotton cleaning processes

UZBEKISTAN” JURNALI · Imomnazarov Khurshidbek Khushnazar’s boy · Tojimatova Feruza Mamaro‘zi’s girl

Журнал научно-инновационных исследований в Узбекистане · 03 · 88-21 · 2025

Аннотация

This article analyzes the design of stone holders used in cotton ginning technological processes and proposes an improved design of stone holders. Keywords: cottonseed, stone crusher, heavy mixture, pockets, pneumatic transport, speed, air pressure Introduction. Comprehensive measures are being implemented to develop the cotton sector, modernize and technically re-equip cotton ginning enterprises, increase the profitability of production and processing of cotton raw materials, as well as the competitiveness of manufactured products. Because the ever-increasing demand for cotton and its products indicates the need to use modern equipment and technologies in the cotton ginning industry. One of the current goals is to radically improve the management system of the cotton sector, expand the production of competitive and high-quality finished products with high added value, and further export them to major foreign markets. And a number of new projects are being developed in this direction. The efficiency of the equipment installed in the technological process of cotton ginning enterprises, their uninterrupted operation, has a significant impact on the composition of cotton. Heavy impurities in the cotton content cause damage to the working parts of the ginning machines and the teeth of the saws of gins and linters during its processing. Such a change leads to damage to the seeds and fibers during the separation of fiber from the seed in the gin. This in turn leads to a decrease in the cleaning efficiency of cotton ginning machines and the inclusion of more cotton pieces in the waste. In addition, heavy impurities can cause fires as a result of hitting the metal and working bodies of the processing machines. Therefore, the ingress of heavy impurities into the working chambers of cotton processing machines has always been the focus of attention of scientists and industry experts in this field, and they have been looking for ways to completely retain heavy impurities in the air-carrying device. 459 “JOURNAL OF SCIENCE-INNOVATIVE RESEARCH IN UZBEKISTAN” JURNALI VOLUME 03, ISSUE 06, 2025. JUNE ResearchBib Impact Factor: 9.654/2024 ISSN 2992-8869 D.L. Kelbert [1] conducted a study on the causes of fires in the process of separating fiber from the grain in the saw teeth of cotton ginners, gins and linters. It was determined that this was mainly caused by metal fragments (nails, nuts, washers) in the composition of heavy alloys. The composition of heavy alloys trapped by stone traps installed in the technological process of cotton ginners is shown. The principle of operation of the air-assisted conveyor is that atmospheric air, under the flow formed due to the pressure difference, carries the transported material along with it and pushes it into the pipe. The cotton moves in a suspended state inside the pipe and reaches the separator. The separator separates the material from the carrier air and transfers it to the next technological unit. The advantage of the suction air conveyor is that the working pipeline system can be easily and conveniently changed depending on the location of the cotton ginning plants, and the length of the pneumatic line can be extended by connecting additional pipes to the initial pipes. The production capacity of the air conveyor depends on the production capacity of the cotton ginning plant. For an advanced cotton ginning plant with one battery, it is 10 tons per hour. With the growth of the cotton production rate, the cotton processing industry sets itself the task of increasing production capacity, increasing the productivity of equipment, and improving product quality. The implementation of these tasks is largely dependent on the operation of the air conveyor installed in the area. Because it is directly integrated into the continuous technological process of the cotton ginning plant and is an important part of its initial and working rate. Stone holders are divided into two types depending on the installation location. The first is linear stone holders. They are located in the line of the air conveyor and are installed before the separator. The second is non-linear stone holders, which are installed after the separator. In order to achieve the highest possible retention of heavy impurities and metal fragments in the cotton, it is necessary to study the movement of cotton in the separation chamber of the devices created. The intended purpose is to determine the trajectories of cotton and heavy impurities in the working chambers of newly created multi-pocket radial and cylindrical stone holders. Using this trajectory, it will be possible to determine the location of the pockets and elastic plates in the working 460 “JOURNAL OF SCIENCE-INNOVATIVE RESEARCH IN UZBEKISTAN” JURNALI VOLUME 03, ISSUE 06, 2025. JUNE ResearchBib Impact Factor: 9.654/2024 ISSN 2992-8869 chamber. Currently, the following stone holders and their improved designs are in operation at cotton ginning enterprises. 2CHTL hea

Доказательный фрагмент

«This article analyzes the design of stone holders used in cotton ginning technological processes and proposes an improved design of stone holders.»

Образец извлечения

Демо-превью

This article analyzes the design of stone holders used in cotton ginning technological processes and proposes an improved design of stone holders. Полный текст публикации CiteX не хранит — доступ к первоисточнику открывается по DOI согласно лицензии издателя и выбранному плану.

DOI не указан
Цитирований
0
Просмотров
0
Тип
Журнал
Страна
Узбекистан
Ключевые слова
cottonseed, stone crusher, heavy mixture, pockets, pneumatic, pneumatic transport, air pressure, speed
Спросить CiteX об этой работе

Смежные источники