Научные статьиM.H.Sayidova, S.U.Pulatova2025
MODERN SOLUTIONS TO THE PROBLEM OF PLACING UNDERGROUND ENGINEERING NETWORKS IN LARGE CITIES, ECONOMIC APPROACHES AND PROSPECTS.
UsmonovQuvat Turdiyevich · assistantOrazbayeva Nazokat Maksetovna.
Журнал мультидисциплинарных наук и инноваций · 4 · 2026
Аннотация
Issues such as conGEStion, aging, and maintenance of public transport in urban areas are addressed. Advanced technologies used in the deployment of public transport, including transponderless technologies Keywords: underground engineering networks, urban planning, networkless technologies, GIS, 3Dmodeling, smart grids, underground communications,urbanization, innovative solutions. Introduction: The steady growth of the population in cities and the acceleration of the urbanization process are placing increasing economic and social demands onurbaninfrastructure, namely underground engineering networks (UEN). UEN is an element of important civil engineering sectors that ensure the vital activity of cities and includes the following services: electricity, hot and cold water, gas, communications and sewage. In developed cities, underground engineering networks (UEN) are an important component of modern society, providing daily vital services to city residents. Ensuring the uninterrupted operation of UEN is importantfor thesustainabledevelopment ofcities. Underground engineering networks are mainly located under the city's street and road networks. The procedures for their placement are based on regulatory documents governing the field of urban development. These regulatory documents establish the following procedure for the placement of underground engineering networks in the cross section of a city street: high and low voltage cables are placed between the construction line and the red line (communication, signal, telephone, and dispatcher, etc.); underground engineering networks such as hot and cold water and gas are placed between the red line of the street and the carriageway; a pipeline for https://ijmri.de/index.php/jmsi volume 4,issue4,2025 226 draining wastewater generated from thearea is placed underthe carriageway ofthe street[1]. However, existing publictransport systems in developed cities face a numberofproblems. The dense location and aging of the networks, i.e., much of the TSO infrastructure was builtseveral decades ago and is nowin need ofrenovation andis aging. The difficulty of repair and maintenance, as TSOs are often located in densely populated andheavily trafficked urban areas, making it difficult tocarry outrepairs. The negative impact on the environment can lead to excavations in the area, soil erosion, andgroundwater pollution; The complexity of management and monitoring, which reduces efficiency due to the lack ofcoordination between engineering networks managed bydifferent organizations. From an economic point of view, the costs of constructing and maintaining underground engineering systems can bemore expensivethanabove-ground systems. 1. Considering the separate placement of engineering networks, we can see the impact on road infrastructure. The following processes are carried out for the placement of engineering networks: Excavation works open the road layers for the installation of underground communications. Laying pipes and cables -water, gas, electricity- communication and sewage networks are laid. Road surface restoration - excavated areas are re-asphalted or covered with concrete. Such processes lead to rapid wear ofcity roads and increaseoperating costs. 2. From an economic point of view, excavation and repair of road layers is one of the significant sources of costs when laying underground engineering networks. On average, excavation and laying of pipes - 150,000 - 500,000 USDper1km is required. • Asphalt • Fine-grained concrete: 10-12 cm • Waterproofing • Crushed stonefraction 5-40 mm:15-20 cm • Sand (sand): 15-20 cm • Soil(soil Figure1.Cross-sectionof theroadsurface layers. Consists of soil, sand, gravel and asphalt layers from bottom to top. The asphalt layer is laid with aslope(0.8-1.5%) and thethickness ofeach layer is given in centimeters. Comparing underground and above-ground engineering networks, we can see the costs for https://ijmri.de/index.php/jmsi volume 4,issue4,2025 227 repairing 1m2 ofasphalt road in thetablebelow. Table1 Types ofcosts Work performed Expense account S. (US dollars) Excavation work Removal ofearthworks 100-110 Removalof old asphalt Leveling ofthe baselayer 50-120 Soilcompaction Useof mechanisms 60-120 Gravel laying Gravel sand mixture 80-150 Gravel sand mixture Asphalt subgrade preparation 100-120 layer Coarse-grained asphalt laying Leveling of coarse-grained 150-180 asphalt Laying fine-grained asphalt 5-10cm thick asphalt 200-300 Strengthening the edges of the Curbs andother elements 50-150 road Installation and drawing of Drawing ofroad lines 35-80 signs Totalcosts (1m2) Onaverage 800-1300 It can be seen that the cost of repairing 1 m2 of asphalt road can be approximately 800-1300 US dollars, and for a complete repair of 1 km of asphalt road - 100,000-1,000,000 US dollars. In addition, thedynamics of prices may vary depending onthe specifics ofeach area and theproject. Given the high cost of each hectare of urban area, it is necess
Доказательный фрагмент
«Issues such as conGEStion, aging, and maintenance of public transport in urban areas are addressed.»
Образец извлечения
Демо-превьюIssues such as conGEStion, aging, and maintenance of public transport in urban areas are addressed. Полный текст публикации CiteX не хранит — доступ к первоисточнику открывается по DOI согласно лицензии издателя и выбранному плану.
- Цитирований
- 0
- Просмотров
- 0
- Тип
- Журнал
- Страна
- Узбекистан
- Ключевые слова
- underground engineering networks, urban planning, networkless technologies, GIS
Смежные источники
Общество и инновацииKhosiyat MAMATKULOVA2024
Академические исследования в современной наукеKhudaiberdiyeva Arafat Israilovna, Ph.D Professor hudayberdiyevaarofat@gmail.com +12026
Научные статьиI.B.Yangiboyev, E.X.Berdanov +22025